Step by Step - Screws and Anchors

Layout the brackets on the frame to verify the correct position. Ensure the opening of the slots on the bracket face up on the frame.

Mark the frame where the small screws will be.

Screw the small screws into the frame. Leave room for the bracket to slide under the screw head.

Slide the bracket under the screw heads.

Align the frame and brackets against the wall and mark the location for the long screws and anchors.

Screw the anchors into the wall at the marked location.

Screw the long screws into the anchors. Leave enough room to slide the bracket under the head of the screw.

Hang the frame by sliding the frame and brackets under the head of the long screws.

You may need to tighten the screws slightly to make sure the frame and brackets are snug and secure.